Thanks Bob has anybody converted steering column to GM model as kit car company RCR for an SL-C SELLS?
There has been much talk about different steering wheels.
The one that I used was AIM GT320 wheel.
DSC00261.jpg
From this wheel I can see road speed, RPM, oil pressure, H2O temp plus 4 buttons to control what you want. I used for directional, dip switch, trans fan. Built in horn buttons in grips, shift lights in top of wheel. So far this wheel has been very good to me.
2014 Ultima GTR, LS7, Albins ST6-M, Sat nav, Motec ECU, PDM, Keypad, Ride height control,
2009 Factory Five Cobra, 427w, Stack fuel injection, TKO600
Thanks Bob has anybody converted steering column to GM model as kit car company RCR for an SL-C SELLS?
Hi John,
Sorry for the delay, As far as I know, nobody has done the GM column. The area behind the dash is tight and its an odd angle to the rack. The connection point on the rack is dead center of the car, so there is a steep angle about 15 inches behind dash face to rack.
2014 Ultima GTR, LS7, Albins ST6-M, Sat nav, Motec ECU, PDM, Keypad, Ride height control,
2009 Factory Five Cobra, 427w, Stack fuel injection, TKO600
Bookmarks